loop control algorithm

英 [luːp kənˈtrəʊl ˈælɡərɪðəm] 美 [luːp kənˈtroʊl ˈælɡərɪðəm]

循环控制算法

计算机



双语例句

  1. Design of Double Loop DC Motor Speed Control System Based on Fuzzy Control and Generic Algorithm
    基于遗传算法的模糊自整定双环直流调速系统
  2. In the loop control level, the fuzzy control algorithm with variable and adjustable factor is adopted;
    回路控制级采用可变调节因子模糊控制算法;
  3. A digital rebalance loop based on FPGA was designed according to the digital rebalance loop of dynamically tuned gyroscope ( DTG) and the decoupling control algorithm.
    根据动力调谐陀螺仪(DTG)再平衡回路工作原理和解耦控制算法,设计了基于FPGA的数字再平衡回路。
  4. The model of speed loop control system as well as the integral separating PI controlled algorithm was analyzed in detail.
    对控制系统建模和积分分离PI算法进行了详细的分析。
  5. The introduction and intercomparison of multiple variable generalised forecast control algorithm, implicit algorithm and feedforward algorithm are presented. A dual loop controller with adaptive control based on multiple variable generalised forecast algorithm is introduced.
    首先介绍、比较了多变量广义预报控制算法、隐式算法和前馈算法,接着介绍了采用在多变量广义预报控制算法基础上形成的自适应控制的双回路控制器。
  6. The three-closed-loops control system, which includes position loop, speed loop and current loop, is proposed for clutch control system, and control algorithm is designed for each controller with indirect designing method.
    针对离合器控制方案提出位置环、速度环和电流环三闭环控制方案,利用间接设计方法设计出各数字控制器的算法。
  7. In addition, a closed-loop control algorithm and structure were presented.
    同时提出了系统的闭环控制策略与控制结构。
  8. The SG-ⅲ 3 ω laser auto-collimation system and its control algorithm are studied based on loop feedback control theory. The operation principle, control algorithm and software control flowchart of the system are analyzed.
    基于闭环反馈控制理论,对神光-Ⅲ3光源自动准直系统进行设计,分析系统的工作原理、控制算法和软件控制流程。
  9. The inner loop of the cascade controller adopts adaptive control algorithm with inductance and input voltage estimators and takes the inductor current as the controlled variable.
    控制器的内环采用基于电感和输入电压估计的自适应控制算法,以电感电流为被控量;
  10. Proposed based on the above. The proposed algorithm has a better track capability of block error rate target compare to other uplink outer loop power control algorithm.
    与其它上行外环功率控制算法相比,所提算法对目标误块率(BLER(target))具有更好的跟踪性。
  11. In this paper, the design and implementation of the robot control system based on DSP are introduced. In addition, the hardware structure of the system and the DSP's main execution loop are presented. An improved PID servo control algorithm is also used.
    本文介绍了基于DSP的机器人控制系统的设计与实现技术,给出了系统的硬件结构及DSP运行的主流程,并采用了一个改进的PID伺服控制算法,最后阐述了系统的主要功能模块。
  12. An SIR-Based Close Loop Power Control Algorithm for DS-CDMA systems
    一种基于SIR的DS-CDMA系统闭环功率控制算法
  13. A precise AC/ DC programmable source based on PC/ 104 bus and digital close loop is introduced. The hardware diagrammatic layout and PID control algorithm are presented in detail. The programmable source is portable.
    介绍了一个在PC/104总线基础上采用数字闭环技术实现的交、直流精密程控电源,详述了组成数字闭环的硬件原理框图和PID控制算法。
  14. The concept of software implementation of closed loop governing fuzzy control algorithm is presented.
    介绍了闭环调速模糊控制算法的软件实现思想。
  15. A predictive control algorithm is designed based on this model, and the approach ability and convergence of this model are analyzed. Moreover, the close loop stability of this control algorithm is analyzed as well.
    基于这种模型设计了预测控制算法,并分析了该模型的逼近能力、收敛性以及该控制算法的闭环稳定性。
  16. The outer loop of the cascade system adopts adaptive control algorithm with a parameter estimator and takes the capacitor voltage as the controlled variable.
    系统的外环采用基于参数估计的自适应控制算法,以电容电压为被控量;
  17. Mechanisms of loop control in MPLS and colored thread algorithm are introduced and realized using Java.
    本文介绍了MPLS中回路问题的主要解决方法,分析了COLOREDTHREAD算法的主要思想,并使用Java技术实现了该算法。
  18. As an example, the closed loop speed control algorithm of the system is described.
    以速度闭环控制为例,介绍了系统控制算法的设计。
  19. An SIR-based close loop power control algorithm is presented. The pilot symbols of control channel in DS-CDMA up-link system are used to measure the received SIR.
    针对采用专用控制信道的DS-CDMA系统的上行链路,本文直接利用控制信道的导频符号进行SIR测量的闭环功率控制,并通过计算机仿真对链路的性能进行分析。
  20. The NNC controller can follow the tacks of typical course curve with good precision, then a closed loop control system is constructed using closed loop gain shaping algorithm.
    然后应用闭环增益成形算法,形成闭环控制系统。
  21. The conception and theory of the Neural Network control and closed loop gain shaping control algorithm are introduced simply.
    首先对神经网络控制概念和原理与闭环增益成形算法进行简单的介绍。
  22. Based on the controlled system equation, proposed an open-close loop PID type ILC network congestion control algorithm and proved its mathematical convergence.
    依据被控系统的方程,提出了基于开闭环PID型ILC的网络拥塞控制算法,并对基于开闭环PID型ILC的网络拥塞控制学习律的收敛性进行证明。
  23. Meanwhile the disadvantage of conventional open loop tension control system is pointed put, and the algorithm of closed loop tension control is deeply researched.
    指出了常规开环张力控制的不足,深入研究了张力闭环控制算法。
  24. The outer loop controller is the speed controller, and the inner loop controller is the current controller, both using PI control algorithm to automatically recognize the welding track and to accurately track and control.
    外环控制器是速度控制器,内环控制器是电流控制器,控制器采用PI控制算法,实现对焊接路径的自动识别及精确跟踪控制。
  25. But the robust performance is improved obviously when the closed loop gain shaping control algorithm is introduced into the ship motion system on the basis of neural network control in the thesis.
    本文在神经网络直接控制船舶运动控制基础上,引入闭环增益成形算法构成闭环控制,以提高系统对环境干扰和过程参数摄动的鲁棒性。
  26. The method is characterized by the adaptive model following control which is designed only for motor and its drive system, but still the classical control is introduced as position feedback loop, which greatly simplifies the adaptive control algorithm and provides the basis for the implementation of engineering.
    该方法的特点是只针对电机及其驱动系统部分设计自适应模型跟随控制,而位置反馈外环仍采用古典的反馈控制,大大简化了自适应控制算法,为其工程实现提供了基础。
  27. Position, velocity loop regulator uses two PID control algorithm to achieve, the speed ring is designed based on vector control.
    位置,速度环两个调节器采用PID控制算法实现,速度环是基于矢量控制而设计的。
  28. According to the different characteristics of each loop, the appropriate control algorithm is chosen. Secondly, for the steering system exist nonlinear factors, intelligent algorithms is introduced to traditional PID control. Fuzzy PID control strategy is applied to position loop regulators.
    其次,针对舵机系统客观存在的非线性因素,探索智能算法加PID的控制策略,将其应用于位置环调节。
  29. Car flow detectors are integrated with Intelligent Traffic Signal Controller to form a closed loop control system, running the self-adaptive control algorithm, increasing intelligence to the system, achieving good control results. 3.
    使用视频检测器和信号机组成闭环控制系统,运行自适应控制算法,提高了系统的智能化水平,取得了良好的控制效果。
  30. Rapid prototyping of constant speed cruise algorithm, the vehicle controller uint software architecture and hardware in the loop simulation technology of the constant speed cruise control algorithm, which are the three aspects of constant speed cruise control strategy implementation techniques are described here firstly.
    首先,从定速巡航算法的快速原型开发、整车控制器的软件架构以及定速巡航控制算法的硬件在回路仿真技术三个方面对定速巡航控制策略的实现技术进行描述。